Fan Calibration Variable Calculator

The ATTMA Trade Association has developed the following Fan Calibration Variable tool to calculate fan calibration variables, particularly useful for new Retrotec Fans which use Polynomial variables.

Fan Calibration Variable Calculator

Enter appropriate numbers and units from your calibration certificate and the unit of measure you wish the calibration variables to be displayed for entry into your air tightness testing software. For the vast majority of fans leave the Polynomial check box unticked as this is specifically for the B4 and smaller range plates on the Retrotec 5000 and 6000 series fans.

No. of Rings/Ranges	No. Readings	Volume Flow Rate
No. of Rings/Ranges	No. Readings	Certificate	Software
		m³/h m³/s ft³/min	m³/h m³/s ft³/min

This tool has been designed for use when the calibration variables have not been provided by your calibration laboratory. An assumed air density of 1.2kg/m³ has been used within the calculator. ATTMA takes no responsibility for errors.

ATTMA are committed to running impartial schemes. Our Impartiality statement, GDPR data management and data and whilstleblowing policies can be accessed by clicking the links below

Impartiality Statement GDPR Data Management

Data Policy Whistleblowing

ATTMA have a full complaints procedure if you are not happy with ATTMA’s service. Our full complaints procedure can be found here.

Unit 3 Tannery Road Industrial Estate
Tannery Road
High Wycombe
Buckinghamshire
HP13 7EQ

Park House
24 Park Square W
Leeds
LS1 2PW

+44 (0) 1494 358159 | admin@bcta.group